# mcpctl × Claude Code

## What `mcpctl config claude --project X` wires up

| Piece | Where | Purpose |
|-------|-------|---------|
| MCP entry | `./.mcp.json` | one server, always named `mcpctl`, running the stdio bridge `mcpctl mcp -p X` |
| Project marker | `./.mcpctl-project` | what `skills sync` reads to know the scope (`--skip-marker` opts out) |
| Skills | `~/.claude/skills/` | the project's `SKILL.md` bundles |
| SessionStart hook | `~/.claude/settings.json` | `mcpctl skills sync --quiet` on every session |
| Status line | `~/.claude/settings.json` | the active project, bottom of the screen |
| `/mcpctl` | `~/.claude/commands/mcpctl.md` | switch projects from inside a session |

`--claude-dir` (or Claude Code's own `CLAUDE_CONFIG_DIR`) redirects everything
under `~/.claude`.

## One server named `mcpctl`, not one per project

The MCP entry used to be named after the project. Because `.mcp.json` is
*merged*, configuring a second project left the first mounted too — every
project you had ever configured stayed connected, with duplicate tool names and
nothing marking which was active.

There is now exactly one entry, `mcpctl`, and switching rewrites what sits
behind it:

```jsonc
{ "mcpServers": { "mcpctl": { "command": "mcpctl", "args": ["mcp", "-p", "docmost"] } } }
```

Two things follow. The tool prefix is stable across switches, so the model never
sees a tool namespace disappear mid-conversation. And because Claude Code can
reconnect an existing MCP server from `/mcp`, a switch lands without restarting
the app.

Entries an older CLI wrote are retired on the next run. They are recognised by
the pairing that makes retiring them safe — *our* command, named after the very
project it bridges to. A hand-configured server is never touched, even one
called `docmost`, unless it also runs `mcpctl mcp -p docmost`, at which point it
is the same entry anyway.

## Switching: `/mcpctl`

```
❯ /mcpctl docmost
● Bash(mcpctl config claude --project docmost --skip-marker)
  ⎿  Wrote .mcp.json (1 server(s))
● Now on docmost. Reconnect the mcpctl server from /mcp for its tools to load.
```

With no argument it lists the projects and asks.

Claude Code slash commands are **prompt files, not code**, so unlike opencode's
picker this drives the model through CLI calls — there is no keyboard picker to
be had. `allowed-tools` is scoped to the four exact `mcpctl` invocations it
needs, so accepting it does not hand the session a general shell.

> Every `` !`…` `` block in a slash command is permission-checked against
> `allowed-tools` *before* the model runs. Omitting one fails the whole command
> with a permission error and no explanation. A test asserts every pre-executed
> command in ours is covered.

`--skip-marker` is deliberate: the session's directory is whatever you happened
to open, and re-scoping it would silently change which skills sync into it.

## The status line

```
  mcpctl:docmost
  ⏵⏵ bypass permissions on · ← for agents
```

`mcpctl statusline` resolves the project from `.mcp.json`, falling back to a
`.mcpctl-project` marker up the tree so a checkout that is scoped but not yet
wired still reports. It reads the directory from the JSON Claude Code pipes in,
so it follows `/cwd` rather than reporting wherever the binary was launched, and
prints **nothing** when no project is active — an empty status line beats one
saying "none" on every unrelated repo.

### It is never installed over yours

A status line is a single slot, so overwriting a custom one silently deletes
work. When `config claude` finds a foreign one it leaves it and prints the
snippet to add instead:

```
Left your existing status line alone (my-fancy-prompt).
  To show the project too, append: $(mcpctl statusline)
```

> **Ownership is decided by the command string, not a marker.** Claude Code
> rewrites `settings.json` against its own schema and **strips unknown keys from
> `statusLine`** — a tagged entry comes back as a bare `{type, command}`.
> (Hooks keep their marker; `statusLine` does not.) Matching on the command is
> what stops us reporting our own line as foreign forever. A line that merely
> *composes* ours — `my-prompt && mcpctl statusline` — is yours, and is left
> alone.

## Skills

`mcpctl skills sync` installs into `~/.claude/skills/`. Claude Code is the only
target that also gets hooks, `postInstall` and `mcpServers` auto-attach; pi,
prime-agent and opencode share the simpler flat-tree semantics.

The SessionStart hook keeps them current. It carries a `_mcpctl_managed` marker,
and an install now also drops **untagged duplicates of that exact command** —
rows left behind before the marker existed (or by a test suite that used to
write into a real `~/.claude`). They are invisible in the UI and just run the
sync twice per session. A hook you wrote is never touched, even one that also
calls `mcpctl skills sync` with different flags.

## Running Claude Code on the homelab LLM

See [claude-vllm.md](claude-vllm.md).